« Prev | | Next »

Sort by:


NASF: OSHA Proposes New Workplace Exposure Standard for Respirable Crystalline Silica
Proposed rule would establish a new PEL of 50 μg/m3 with an action level 25 μg/m3 calculated as an eight-hour time-weighted average for general industry, half of the current standard
Article Published: 12/1/2013
When Plating Meets the Jet Set
Houston plater specializes in finishing private aircraft interiors; company offers more than 130 standard finishes and unlimited custom-matching capabilities.
Article Published: 12/1/2013
NASF: OSHA’s GHS HazCom Rule
OSHA’s implementation of the Globally Harmonized System deadline for the first round of regulations fell on Dec. 1, 2013.
Article Published: 11/25/2013
Is Aerospace Finishing Filled to Capacity?
As Boeing and Airbus demand more finishing capacity, the challenges faced by owners of finishing businesses are pressing, as both customers and regulatory agencies amp up demands for management attention and resources.
Article Published: 11/1/2013
Industry Groups Challenge European REACH on Chromium Trioxide
challenge alleges that the commission erred in its assessment of chromium trioxide for authorization and failed to provide an exemption for the continued use of it and other related compounds in the surface coatings industry.
Article Published: 11/1/2013
Cutting Down Pretreatment Waste and Water
Husqvarna Outdoor Products replaces phosphate pretreatment system after the company launched an initiative at its numerous manufacturing plants around the world to go greener and reduce the amount of waste being discharged.
Article Published: 11/1/2013
Electrodeposition of Ni-Fe-Mo-W Alloys - Part 2
This paper was submitted to NASF and the AESF Foundation Research Board in July 2013 as a 2nd-quarter report of AESF Research Project #R-117.
Article: External Published: 10/10/2013
Plater Grows Bigger in Texas With Oil, Gas Customers
Schumacher Industries expands to fill oil, gas finishing needs in Texas.
Article Published: 8/1/2013
Preventing Soil Contamination is Good Business For Witt Lining Systems
Manufactures flexible PVC liners used for corrosion resistance in process tanks, storage tanks, vats, sumps, pits and containment areas.
Article Published: 8/1/2013
Shine & Dandy
SRG Global spans the globe plating automotive trim for nearly all the major car manufacturers, duplicating quality and control at all their plants around the world.
Article Published: 7/1/2013

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved