« Prev | | Next »

Sort by:


NASF REPORT: SUR/FIN 2012 Excels in Las Vegas
This year’s NASF conference in Las Vegas was said by many to be the “best SUR/FIN” they attended in some time.
Article Published: 8/1/2012
Road Trip! ... to SUR/FIN Las Vegas!
As the NASF SUR/FIN show gets ready to open in a few weeks in Las Vegas, Products Finishing magazine decided to take a ‘Virtual Road Trip’ across the U.S. to surveys job shops and platers to get a 'State of Finishing' status. It seems business is g...
Article Published: 6/1/2012
Alternative Bath Control Practice
Your finishing operations can improve quality and lower cost by a change from the standard process control practice to add material following bath analysis
Article Published: 6/1/2012
PPG Industries, AkzoNobel Launch New Aerospace Coating Products
The Aerocron primer from PPG’s aerospace coatings group is the first e-coat primer for airframe manufacturers and subcontractors; AkzoNobel’ Metaflex SP brand is a result of a two-year partnership between AkzoNobel Aerospace Coatings and Pantheon En...
Article Published: 5/1/2012
Sand + Snow Makes Pretreatment Essential
Polaris' finishing department made sure its cleaning and pretreatment process was doing the job right before they electrocoated and powder coated popular off-road vehicles, snowmobiles, motorcycles and military vehicles. SEE THE VIDEO
Article Published: 5/1/2012
Aerospace Drives More Calls for Non-Chrome Passivate Finishes
More finishers are warming up to using non-chrome passivation as a way to satisfy customers who don’t want to use hexavalent chromium for corrosion treatment.
Article Published: 5/1/2012
Are Ionic Liquids Right for Your Parts Cleaning Job?
Ionic liquids have also been considered for parts cleaning applications because of their negligible vapor pressure, high thermal and electrochemical stability, and low melting points of less than 100°C.
Article Published: 4/1/2012
Meeting the Critical Cleaning Challenge
Today’s parts cleaning industry faces numerous challenges that can make the selection of an effective critical cleaning system difficult
Article Published: 4/1/2012
Just How Clean Is Clean?
Most finishing consultants have lost count of the number of times that inadequate cleaning and pretreatment was the cause of defective painting or plating. Skip plating, blistering, delamination—these are just some of the commonly found defects caus...
Article Published: 2/1/2012
Stacking Up Against Tight Medical Tolerances
The benefits of using dry lubricant coatings in medical mechanical assemblies
Article Published: 11/1/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved