« Prev | | Next »

Sort by:


A Tale of Two Shops: Machining and Plating
Seattle machine shop buys finishing operation to convert to Nadcap.
Article Published: 3/1/2016
TOP SHOPS: RPW/ Elite Finishing
RPW was started in 1929 by Julian Maliszewski, the grandfather of the current owners. Julian’s father, John, ran the company for decades before his three sons took over the
Article Published: 12/1/2015
Nominations For The Electroplating Hall of Fame
Help us decide who should be inducted in the Electroplating Hall of Fame by sending us your nominations.
Article Published: 11/1/2015
Electroless Nickel-Plated Steel vs. Stainless Steel
Corrosion resistance comparisons and cost savings of EN-plated mild steel versus 400 series stainless steel.
Article Published: 10/1/2015
Some Contributions of U.S. Supply Houses to Plating Science and Technology - The 11th William Blum Lecture
This paper is a re-publication of the 11th William Blum Lecture, presented at the 57th AES Annual Convention in Montréal, Québec, on June 22, 1970. The origins of several developments in the plating field are reviewed, showing why and how the proce...
Article: External Published: 8/19/2015
Zinc-Nickel Teaches Experienced Plater New Tricks
"Old Dog" Micro Metal Finishing loses one line, gains another with help of chemical supplier.
Article Published: 8/1/2015
Rebuilding the KEI Plating Giant_2
Oscar Kuntz’s grandsons have turned around the automotive plating firm.
Article Published: 7/1/2015
Scratching the Surface on Corrosion Testing of Automotive Coatings
Exposure to road salts, UV radiation, heat, moisture and chipping from kicked-up road debris can quickly degrade an automotive coating system.
Article Published: 7/1/2015
Rebuilding the KEI Plating Giant
Oscar Kuntz’s grandsons have turned around the automotive plating firm from the brink to success again.
Article Published: 7/1/2015
Some Engineering Aspects of Electrodeposition - The 6th William Blum Lecture
This paper is a re-publication of the 6th William Blum Lecture, presented at the 51st AES Annual Convention in St. Louis, Missouri, on June 15, 1964.
Article: External Published: 5/17/2015

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved