Nickel Plating

Exploring the: Nickel Plating Zone

202 Results for: Blog

Sort by:
Published: 7/13/2017

California Plating Chapters Host Supplier Showcase
The MFASC Conference will be in Montebello on Sept. 26, and the MFANC Conference will be in San Jose Sept. 28.

Published: 7/1/2017

Study Reveals Finishing Industry Barriers to Phasing Out Cadmium
Sifco conducted the survey, which they say was done to gage the industry knowledge of about speculation that the U.S. aerospace industry will phase out cadmium by 2023.

Published: 6/29/2017

Microfinish Acquires Roc Industries in Belleville, Ill
Micofinish has more than 240,000 square feet of facilities in Saint Louis, and has more than 450 customers throughout the Midwest and around the U.S.

Published: 6/23/2017

Surface Technology Plates Second Cycle of Brompton Bikes
The Nickel Edition, the most advanced finish used by Brompton to date, is electroless nickel plated by Surface Technology at its Leeds facility in England.

Published: 6/9/2017

Rebecca Bennett Receives Bertram A. Stone Award
Bertram A. Stone Award is the top award of Chicago Midwest Chapter of NASF, and is bestowed on an individual who has performed outstanding service to the finishing industry locally and/or nationally.

Published: 3/10/2017

Anoplate Welcomes STEM Students for Plant Tour
The students listened to the benefits that surface engineering can provide, took part in a hands-on demonstration and gained insight into the little known—and much less appreciated—technical vocational career opportunities in metal finishing.

Published: 2/16/2017

Arresting Indoor Air Quality Criminals in Metal Finishing and Chemical Tanks
These so-called ‘criminals’—indoor air quality criminals, that is—can escape from open surface tanks causing irritation or harm to operators.

Published: 2/14/2017

Atotech Acquires Pegastech Plating on Plastics Technology
Pegastech has developed a technology for plating on plastics that does not use hexavalent chromium or palladium compounds for the pretreatment of polymers prior to electroplating.

Published: 2/6/2017

Reliable Plating Works, Elite Finishing Hold Plating Education Month in February
Customers are given a plant tour of the Elite Finishing facility, followed by discussion on design, cost drivers, materials, processes and a show-and-tell session.

Published: 1/31/2017

Metal Finisher Richard Taylor Passes at 100
Products Finishing wrote about Taylor in 2016, as he was still working at his shop now run by his children.