« Prev | | Next »

Sort by:


Nickel Saved is Nickel Earned
Those in the plating industry are continually working on the development of a process to recover valuable nickel from spent electroless nickel solutions. Now there is a two-stage method to do just that.
Article Published: 2/1/2013
Impact of REACH Regulation on the Global Finishing Market
This paper is a peer-reviewed and edited version of a presentation delivered at NASF SUR/FIN 2012 in Las Vegas, Nev., on June 12, 2012.
Article: External Published: 1/21/2013
More Environmental Cases are Going Criminal
Surface finishers and others operating in industries highly regulated by federal, state and local environmental protection agencies have seen an increase in the number of violations that have escalated from administrative notices of violations and f...
Article Published: 1/1/2013
Just Peachy in South Carolina as Palmetto Plating thrives on ingenuity, automotives
More than 1 million of them pass through tanks each year at Palmetto, which specializes in anodizing, black oxide, chromate conversion coatings, decorative and hard chrome, electroless nickel, pickling, and passivation.
Article Published: 1/1/2013
nCoP Takes the Hex Out of Chrome Plating
Electrodeposited nanocrystalline cobalt-phosphorus (nCoP) has emerged as a viable environmental alternative to hard chromium coatings for both line-of-sight (LOS) and non-line-of-sight (NLOS) applications. The coatings’ material properties revealed ...
Article Published: 12/1/2012
NASF REPORT: NASF Collaborates with Canadian Finishers
The CASF “Forum” conference in Toronto provided an informative overview of compliance issues and emerging regulatory issues. Also: NASF coordinating with Nickel Institute on nickel salts, metals data.
Article Published: 12/1/2012
U.S. EPA Tightens Chromium Air Standards for Coatings
NASF Highlights Weak Rationale to White House
Article Published: 10/1/2012
EN-Boron Coatings Take Shine Off Hard Chrome
In the search for the “next best thing,” some platers are turning to an electroless nickel bath with boron, often with remarkable success and outstanding results. Thus, the reintroduction of NiB as a cost-effective Chrome replacement.
Article Published: 10/1/2012
EPA Issues Chromium Air Rule, Despite NASF Meeting With White House Officials
The U.S. EPA signed the final chromium electroplating air rule Aug. 15 after it was finally cleared by the White House; the NASF says it might take the matter to court to overturn the rule.
Article Published: 9/1/2012
NASF REPORT: SUR/FIN 2012 Excels in Las Vegas
This year’s NASF conference in Las Vegas was said by many to be the “best SUR/FIN” they attended in some time.
Article Published: 8/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved