« Prev | | Next »

Sort by:


Medical Coatings Can be the Cure for Plating Shops
Medical Coatings Help Artistic Plating in Milwaukee Focus on the Future, and the transformation has also coincided with the emergence of John Lindstedt’s son, Matt, as the future leader of the company.
Article Published: 9/1/2012
Gas And Oil Platers Are Striking Black Gold in Texas
Houston Plating & Coatings and CEO Bill Howard are reaping the boom in oil and gas industry by running at capacity in its Houston plant, expanding capacity at its Humble plant by 50 percent, and building a new, 80,000-sq-ft plant in Louisiana that w...
Article Published: 8/1/2012
NASF REPORT: SUR/FIN 2012 Excels in Las Vegas
This year’s NASF conference in Las Vegas was said by many to be the “best SUR/FIN” they attended in some time.
Article Published: 8/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Measuring Up On Coating Thickness
Fischer Technology’s DataCenter software eases measurement requirements, giving reasons why management guru W. Edwards Deming said: “If I had to reduce my message for management to just a few words, I’d say it all had to do with reducing variation.”
Article Published: 7/1/2012
Lean = Green for Reliable Plating Works/Elite Finishing
The benefits of lean operations in the plating industry are well known. Here's a story on how a $12 million company, Reliable Plating Works/Elite Finishing in Milwaukee, saved more than $1 million.
Article Published: 6/25/2012
Road Trip! ... to SUR/FIN Las Vegas!
As the NASF SUR/FIN show gets ready to open in a few weeks in Las Vegas, Products Finishing magazine decided to take a ‘Virtual Road Trip’ across the U.S. to surveys job shops and platers to get a 'State of Finishing' status. It seems business is g...
Article Published: 6/1/2012
Shipshape Testing: Software Meets IMO PSPC Requirements.
\New regulations apply to seawater ballast tanks of all types of ships of not less than 500 gross tonnage, and double-side skin spaces arranged in bulk carriers of 150 meters in length and upwards
Article Published: 4/1/2012
Super Finishing: ‘Micro Machining Process’ Vital To Medical Industry
Using high-precision tools and technologies that smoothes a surface—or even intentionally leaves specific controlled amounts of roughness behind—MMP is unlike any treatment on the finishing market.
Article Published: 4/1/2012
Positive Energy Growth
Chrome Deposit Corp. reduces its energy use, minimizes its environmental impact and improves its energy-management practices.
Article Published: 3/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved