« Prev | | Next »

Sort by:


Zinc Plate on Zinc Die Castings
How can we prevent zinc die cast parts from changing color after zinc plating?
Ask an Expert Published: 3/25/2014
Zinc Contamination
How do we remove zinc from our nickel tanks after copper/nickel/chromium plating?
Ask an Expert Published: 2/28/2014
Blisters on Zinc Die Casts
What could be causing blisters to form when plating zinc die cast nameplates?
Ask an Expert Published: 1/23/2014
Cyanide Zinc on Cast Iron
What would be the correct process for plating zinc on cast iron parts?
Ask an Expert Published: 12/5/2013
Blisters on Zinc-Plated Steel
How can we eliminate blistering on steel parts?
Ask an Expert Published: 10/24/2013
Zinc-Plated Pipe Fittings
We zinc plate then apply a yellow trivalent chrome conversion coat to pipe fittings. The rack-plated, large-size pipe fittings look great after plating, but a few days later start to show spots of corrosion. Do you have any suggestions for solving t...
Ask an Expert Published: 10/3/2013
Black Stains on Zinc-Plated Parts
Our rack alkaline-zinc-plated parts occasionally exhibit black or caustic stains that don’t show up for 24 hours. Can we add anything to our plating solution or rinses to eliminate this condition?
Ask an Expert Published: 7/24/2013
Matte Black Zinc Plating
What is the reason for using matte black zinc plating?
Ask an Expert Published: 6/3/2013
Zinc Corrosion
We have been experiencing white corrosion (zinc oxide) while our steel components are in storage. All of these assemblies are nitrogen-brazed components and then are subject to clear zinc plating.What do you think is the root of our problems?
Ask an Expert Published: 5/22/2013
Correction: Non-Electrolytically Applied Zinc Coat
My response in the February issue regarding General Motors specification GMW 3359 for non-electrolytically applied zinc-rich coatings was incorrect. Here is the correct answer.
Ask an Expert Published: 3/19/2013

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved