« Prev | | Next »

Sort by:


Pre-electropolish Surface Refinement with Coated Abrasives
Can you give us finishing guidance and a reference of what abrasive belt and disc grits will achieve a given Ra finish?
Ask an Expert Published: 4/1/2015
Basket Blasting Small Parts for Deburring and Pre-coat Finishing
We machine large quantities of small (0.5" × 0.25" × 0.25") steel alloy parts which have small feather burrs. The surfaces are hard to work for a good pre-coat finish, resulting in coating adhesion problems.
Ask an Expert Published: 4/1/2015
Mass Finishing to De-sharpen Extrusion Burrs
This part is sharp and we need to dull the edges for handling. What finishing process do you recommend?
Ask an Expert Published: 4/1/2015
Reducing Processing Steps for a High-luster Finish
Is there a process that can eliminate one of our cut steps and how do we get a little brighter microbrite finish?
Ask an Expert Published: 2/1/2015
Internal Cross Hole Deburring
We have three full-time deburring operators that are hand deburring aluminum aerospace machined parts with three and four-inch-deep cross holes. This is very difficult and time consuming work. Is there a reasonably priced deburring system that can h...
Ask an Expert Published: 2/1/2015
Internal Cross Hole Deburring
Is there a reasonably priced deburring system that can handle four-inch deep cross holes in aluminum aerospace machined parts?
Ask an Expert Published: 1/19/2015
Multiple Finishing Processes in One Robotic Finishing Cell
How can a shop reduce costs when multiple part families require several finishing tasks?
Ask an Expert Published: 10/1/2014
Dry Mass Finishing Vibratory Processes
Is it possible to run a dry vibratory deburring process for steel parts?
Ask an Expert Published: 10/1/2014
Bowl vs. Tub Vibratory Machine
What should a shop keep in mind when purchasing its first vibratory machine for general finishing and deburring?
Ask an Expert Published: 7/1/2014
Controlling Tight Radius Tolerances
What are some tips for deburring medium-size steel parts while maintaining strict radius tolerances?
Ask an Expert Published: 7/1/2014

« Prev | | Next »


Schaffner Mfg. Co., Inc.

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved