« Prev | | Next »

Sort by:


Removing Buffing Compound
What is the best way to remove buffing compound from brass parts?
Ask an Expert Published: 5/22/2013
Zinc Corrosion
We have been experiencing white corrosion (zinc oxide) while our steel components are in storage. All of these assemblies are nitrogen-brazed components and then are subject to clear zinc plating.What do you think is the root of our problems?
Ask an Expert Published: 5/22/2013
AAMA Specifications for Steel
Do the AAMA powder coat specifications for extruded aluminum—AAMA 2603, AAMA 2604 and AAMA 2605—correlate to the application of steel materials?
Ask an Expert Published: 5/22/2013
Corrosion Protection on Steel
What is the best zinc phosphate process for protecting steel?
Ask an Expert Published: 5/20/2013
Film Thickness Control
What can we do to better control the thickness of the powder on our parts?
Ask an Expert Published: 5/16/2013
“Lumpy” Stannate Tin
I am having problems plating stannate tin on parts that have a copper flash. Parts are “lumpy” and dewetted.
Ask an Expert Published: 5/16/2013
Adhesion Testing
We test the adhesion of plastisol to steel by crosshatch cutting through the plastisol and galvanizing all the way to the steel substrate. Is this test reliable for paint film adhesion?
Ask an Expert Published: 5/15/2013
Plating Copper Bus Bars
Why are the copper bus bars in our plating facility nickel-plated?
Ask an Expert Published: 5/14/2013
Painting Lighted Display Panels
I am looking for information on how to paint lighted display panels such as motor vehicle lit and backlit displays.
Ask an Expert Published: 5/13/2013
Flaking Nickel
Our stripping process sometimes does not remove all of the nickel plate. When re-plated, the areas that still have “old” nickel on the surface tend to flake. Do you have any suggestions for solving this problem?
Ask an Expert Published: 5/10/2013

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2013

Subscribe | Advertise | Contact Us | All Rights Reserved