xxx


« Prev | | Next »

Sort by:


Hazard Waste Management Hours Per Week
Hazardous waste management is one of the hardest responsibilities of a finishing shops due to the regulatory requirement of local, state and federal agencies. The average plating shop in the 2016 Products Finishing Top Shops Benchmarking Survey spen...
News Published: 1/30/2017
Lou Hirbour, former Technic VP, passes
Hirbour had been with Technic for 50 years, beginning as a salesman in the Northeast U.S. in 1961. In later years, he developed Technic’s West Coast regional sales operations and was instrumental in opening the Asian markets for Technic products.
News Published: 1/11/2017
Scrap/Rework Rate as a Pct of Shop Sales
We surveyed plating shops on their scrap and rework rates, and asked them to determine what it was as a percentage of overall sales. The Top Shops came in at a much higher rate of 4.0 percent, which may mean they scrutinize their finished parts more...
News Published: 1/11/2017
Environmental Management Hours Per Week
The 2016 survey showed that Top Shops spent 40 hours per week in environmental management. The average was 26.5 hours and the median was 10 hours. Those shops that are not in the Top Shops program were spending around 2.5 hours per week in environme...
News Published: 12/6/2016
Southern California Platers Search for PFOS Alternatives
SCAQMD, the air pollution control agency for Orange County and the urban portions of Los Angeles, Riverside and San Bernardino counties, requires platers to use a SCAQMD-certified chemical fume suppressant.
News Published: 11/1/2016
Process Technology Adds Two New Sales Management Positions
Process Technology (Mentor, OH) announces the addition of two new sales management positions.
News Published: 10/24/2016
Survey: On-Time Delivery Rate
On-time delivery rate is a crucial factor in customer service when it comes to the finishing industry. In our Top Shops Benchmarking Survey for electroplaters, the top 20 percent of shops had a 99.0 percent on-time rate; all other shops had a 90.0 p...
News Published: 10/18/2016
Asterion White Paper Details How Water Selection Impacts the Plating Process
“Water and the Plating Process” is authored by technical sales engineer Jake Fisher, and details how water plays an integral and critical role in the plating process.
News Published: 10/18/2016
Asterion New Sample Submission Process Delivers Enhanced Customer Experience
Designed to ensure ease-of-use and quick customer response, the submission process meets growing customer requirements to optimize plating line efficiency and productivity at a low cost of ownership.
News Published: 9/20/2016
Sifco ASC to Host Free Event on Extending Equipment Life
‘Extending Equipment Life for You and Your Customers’ will take place on Thursday, September 15 at Sifco’s facility in Houston.
News Published: 8/17/2016

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2017

Subscribe | Advertise | Contact Us | All Rights Reserved