« Prev | | Next »

Sort by:


Nanotechnologies Address Pipe Corrosion
The boom in the gas and oil business, both in the United States and globally, has refocused attention on efforts to reduce corrosion on the surfaces of pipes and equipment used in the industry.
Article Published: 3/1/2013
PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Article Published: 2/1/2013
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating sy...
Article Published: 12/1/2012
A Dip in the Coatings Pool for Durability
OEMs turn to dip coating for products both large and small.
Article Published: 10/1/2012
Manufacturer-Turned-Powder Coater Means Value Added
Wisconsin foundry adds value to parts produced with powder coating line.
Article Published: 9/1/2012
COATINGS 2012 Preview: Meet the Coaters in St. Louis
COATING 2012 has unique activities to go along with 50+ technical sessions.
Article Published: 9/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Debugging A Powder Coating Line
Faced with an adhesion issue, a manufacturer of aluminum fence and rail products set out to find the solution to their problem, even if it meant taking apart his line components one-by-one.
Article Published: 4/1/2012
Shipshape Testing: Software Meets IMO PSPC Requirements.
\New regulations apply to seawater ballast tanks of all types of ships of not less than 500 gross tonnage, and double-side skin spaces arranged in bulk carriers of 150 meters in length and upwards
Article Published: 4/1/2012
How Fabricators and Finishers Can Finish the Job—Fast
Fabricators and finishers can work together to reduce lead-time. Sheet metal fabricators and custom coaters—so alike in some ways, unlike in others—sometimes clash. Both juggle myriad orders of varying quantities and due dates, and both measure succ...
Article Published: 3/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved