[ Log On ]
Exploring the: Pretreatment for Powder Zone
|
Sort by: |
- Chemetall Opens $25 Million Facility In Michigan This Month
- 200,000 square feet to house administrative, manufacturing, warehousing operations and physical testing laboratory.
Blog Published: 10/15/2012
- Protech Purchases Texas' Innotek Powder Coatings
- Innotek of Big Spring, Texas specializes in high performance thermoplastic powder coatings.
Blog Published: 9/19/2012
- Powder Coating Q&A: Powder on Aluminum Extrusion
- Q. Can powder coatings meet AAMA 2604 and 2605 standards? What are the strengths and limitations of powder versus liquid coating? Read Rodger Talbert's answer
Blog Published: 9/12/2012
- CCAI’s Finishing Conference at FABTECH to Include First Session in Spanish
- CCAI will offer 38 hours of finishing programming at FABTECH from November 12-14 in Las Vegas, including an "Introduction to Powder Coating" session conducted in Spanish.
Blog Published: 8/6/2012
- Powder Coating Training Class is Aug. 14-15
- Parker Ionics hosts PCI training course in Westland, Michigan
Blog Published: 7/27/2012
- Ask The Expert: Streaks in Powder Coating
- Q: We apply a medium-gloss gray powder on our parts at around 3 to 4 mils thickness. Sometimes our operators leave streaks on the parts when they apply the powder.
Blog Published: 6/15/2012
- CCAI Expands Finishing Pavilion at FABTECH
- 25,000 are expected to visit FABTECH in Las Vegas, Nov. 12-14
Blog Published: 5/18/2012
- PCI Executive Director Rodger Talbert Steps Down
- Leaving June 1; also giving up role as PCI Technical Director.
Blog Published: 5/16/2012
- ASK THE EXPERT: Powder Coating Color Change
- Are color changes for powder that are under one minute really possible? Read what Rodger Talbert has to say about that.
Blog Published: 4/27/2012
- PCI's 'Custom Coater Summit' A Big Hit In Vegas
- See The Photos! Coaters meet in Las Vegas to talk shop
Blog Published: 4/5/2012