[ Log On ]
Exploring the: Powder Coatings Zone
|
Sort by: |
- Rubber Powder
- I am looking for a powder that can be applied by electrostatic spraying that will have a rubber-like finish.
Ask an Expert Published: 3/22/2013
- How to Measure Powder Value
- What things should we consider as we evaluate different powder suppliers? How can we compare them so that we get the best material at the best possible price? How can we best determine the right source for our powder?
Ask an Expert Published: 3/19/2013
- Discolored Metallic Powder Finish
- We have a powder coat finish for our railing products that has been discoloring in the mountain states region (Colorado, Utah and Wyoming). The finish is textured metallic with a goldish tint, but it has been turning a darker color and rubs off upon...
Ask an Expert Published: 12/4/2012
- Wrong Color of Powder
- Is it true that one cannot change the color of an existing batch of dry powder coating material?
Ask an Expert Published: 9/25/2012
- Zinc Plating
- What is the proper powder coating material to go over zinc dichromate?
Ask an Expert Published: 9/20/2012
- Powder on Aluminum Extrusion
- We have been using liquid paint for our architectural aluminum extrusions for about 20 years, but have considered using powder coatings to reduce our VOC and save cost. Can powder coatings meet AAMA 2604 and 2605 standards? What are the strengths an...
Ask an Expert Published: 8/2/2012
- Color Change
- Are color changes for powder that are under one minute really possible? I spray all manual in one booth, but I have automatic guns in the other one, and we do reclaim some of our colors, but not all of them.
Ask an Expert Published: 4/13/2012
- Correct Coating for Outdoor Use
- Is powder coating on cold-rolled steel OK for outdoor usage in high-humidity areas like Dubai?
Ask an Expert Published: 4/11/2012
- Clear Coat Over Silver Powder
- I had a commercial applicator powder coat a luggage rack for a motorcycle, applying one coat of a silver color and then a topcoat of clear powder. A few months later, the clear finish cracked. The motorcycle is garage-kept. I consulted with another ...
Ask an Expert Published: 4/10/2012
- Repair/Rework on Powder
- Is there an industry standard with regard to recoating that we can adopt?
Ask an Expert Published: 3/1/2012