« Prev | | Next »

Sort by:


PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Article Published: 2/1/2013
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating sy...
Article Published: 12/1/2012
A Dip in the Coatings Pool for Durability
OEMs turn to dip coating for products both large and small.
Article Published: 10/1/2012
Manufacturer-Turned-Powder Coater Means Value Added
Wisconsin foundry adds value to parts produced with powder coating line.
Article Published: 9/1/2012
COATINGS 2012 Preview: Meet the Coaters in St. Louis
COATING 2012 has unique activities to go along with 50+ technical sessions.
Article Published: 9/1/2012
Debugging A Powder Coating Line
Faced with an adhesion issue, a manufacturer of aluminum fence and rail products set out to find the solution to their problem, even if it meant taking apart his line components one-by-one.
Article Published: 4/1/2012
Fundamentals of Powder Coating
Equipment and process advances drive applications.
Article Published: 9/29/2011
Tumbling to the Finish
The Flow-Clad system of coating smaller parts at higher production rates uses a tumbling method not usually found in many custom coaters. “I just don’t think too many people even know that this process exists,” says president Bob Zimmerli. “It will ...
Article Published: 5/1/2011
Benefits of Powder Coating
If you’ve done your homework, carefully analyzed your options and decided to use powder coating as a surface finish, where do you start?
Article Published: 3/1/2011
Conveyors and Paint Systems
Choosing the right conveyor system, coating technology, and ancillary equipment.
Article Published: 2/22/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved