[ Log On ]
Exploring the: Curing of Powder Coat Zone
|
Sort by: |
- Chemetall Opens $25 Million Facility In Michigan This Month
- 200,000 square feet to house administrative, manufacturing, warehousing operations and physical testing laboratory.
Blog Published: 10/15/2012
- AkzoNobel Interpon Shines At The Shard Inauguration
- Watch VIDEO of new development in the London Bridge quarter that is now the tallest building in Western Europe.
Blog Published: 10/5/2012
- Protech Purchases Texas' Innotek Powder Coatings
- Innotek of Big Spring, Texas specializes in high performance thermoplastic powder coatings.
Blog Published: 9/19/2012
- Powder Coating Q&A: Powder on Aluminum Extrusion
- Q. Can powder coatings meet AAMA 2604 and 2605 standards? What are the strengths and limitations of powder versus liquid coating? Read Rodger Talbert's answer
Blog Published: 9/12/2012
- PPG Earns John Deere Recognition As A Partner-Level Supplier
- Program created in 1991 to provide a supplier evaluation and feedback process that promotes continuous improvement.
Blog Published: 8/23/2012
- CCAI’s Finishing Conference at FABTECH to Include First Session in Spanish
- CCAI will offer 38 hours of finishing programming at FABTECH from November 12-14 in Las Vegas, including an "Introduction to Powder Coating" session conducted in Spanish.
Blog Published: 8/6/2012
- Powder Coating Training Class is Aug. 14-15
- Parker Ionics hosts PCI training course in Westland, Michigan
Blog Published: 7/27/2012
- Ask The Expert: Streaks in Powder Coating
- Q: We apply a medium-gloss gray powder on our parts at around 3 to 4 mils thickness. Sometimes our operators leave streaks on the parts when they apply the powder.
Blog Published: 6/15/2012
- Sherwin-Williams Picked By SERDP To Lead R&D For CARC Powder Topcoat
- $1.4 million project to develop a topcoat for use on military vehicles and support equipment
Blog Published: 6/11/2012
- PLC Holding acquires Wisconsin Oven
- French firm also owns Elmetherm, Elino and Wistra
Blog Published: 6/4/2012