« Prev | | Next »

Sort by:


PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Article Published: 2/1/2013
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating sy...
Article Published: 12/1/2012
A Dip in the Coatings Pool for Durability
OEMs turn to dip coating for products both large and small.
Article Published: 10/1/2012
Manufacturer-Turned-Powder Coater Means Value Added
Wisconsin foundry adds value to parts produced with powder coating line.
Article Published: 9/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Co-Cure to the Rescue For A-Coat and Powder Coating
Henkel’s autodeposition protection technology is an alternative vehicle coating, as Android hopes to produce 9,000 vehicles this year for Florida-based Vehicle Production Group.
Article Published: 7/1/2012
Debugging A Powder Coating Line
Faced with an adhesion issue, a manufacturer of aluminum fence and rail products set out to find the solution to their problem, even if it meant taking apart his line components one-by-one.
Article Published: 4/1/2012
How Fabricators and Finishers Can Finish the Job—Fast
Fabricators and finishers can work together to reduce lead-time. Sheet metal fabricators and custom coaters—so alike in some ways, unlike in others—sometimes clash. Both juggle myriad orders of varying quantities and due dates, and both measure succ...
Article Published: 3/1/2012
Taking It to the Max: Throughput changes that amount to 300% finishing improvement.
When it comes to getting maximum throughput and optimal first pass yield from their finishing departments, Metalcraft of Mayville has quite a story to tell.
Article Published: 3/1/2012
Navy Is Full Steam Ahead On Powder Coating
With the military increasing its use of powder-based coatings to cover vehicles, equipment and ships—the Army has recently announced that it will allow the use of powder coatings in its CARC coverings that are normally e-coated—more assets are getti...
Article Published: 2/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved