« Prev | | Next »

Sort by:


Reworking a Powder Finish
How can we rework scratches or other surface imperfections in a powder-coated finish?
Ask an Expert Published: 1/31/2014
Clear Powder Over Polished Brass
We are thinking of going to a clear powder coating over our polished brass hardware components. What is the preferred method of stripping the powder off of rejects?
Ask an Expert Published: 1/2/2014
Rust Prevention
Is our process for pretreatment and powder coating of outdoor enclosures good enough to prevent rust from appearing, and, if so, how long would it last?
Ask an Expert Published: 9/25/2013
Preparing Steel for Powder Coating
We powder paint steel machinery structures and have several questions.
Ask an Expert Published: 7/25/2013
Adhesion over Powder Coated Surfaces
Is there a way to improve adhesion of two-component polyurethane adhesives to polyester- and epoxy-based powder-coated surfaces?
Ask an Expert Published: 3/25/2013
Paint Over Powder Coating
Can we use water-based paint for touch up on powder-coated parts? Is any surface preparation necessary? What should the curing time and temperature be?
Ask an Expert Published: 1/31/2013
Proper Racking
Is there any way to qualify the impact of racking on the powder coating process?
Ask an Expert Published: 12/13/2012
Discoloration of Powder
n order to powder coat a grey nylon furniture part, I preheat the part, powder coat it with a white coating, cure the white coating, and then apply a powder clear coat over the white and cure that. What could be causing the part to come out of the o...
Ask an Expert Published: 11/2/2012
Powder on Zinc-Plated Steel
What is the correct process for powder coating after zinc plating on steel?
Ask an Expert Published: 9/19/2012
Uniform Film Thickness
How can we set up our racks and adjust our spray guns to get more uniform powder coating coverage?
Ask an Expert Published: 9/18/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved