« Prev | | Next »

Sort by:


Powder Coating Wood Picking Up
Designers have come to appreciate the flexibility provided by a quality powder coat on wood, and consumers have come to appreciate the products’ look, feel and durability.
Article Published: 4/1/2013
Dis-Charge Your Powder
A practical approach to managing electrostatic problems and hazards during powder coating
Article Published: 3/1/2013
Taking the (Oxide) Edge Off
Metal fabricators that laser-cut with oxygen take steps to prepare parts better for powder coating.
Article Published: 3/1/2013
PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Article Published: 2/1/2013
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating sy...
Article Published: 12/1/2012
Manufacturer-Turned-Powder Coater Means Value Added
Wisconsin foundry adds value to parts produced with powder coating line.
Article Published: 9/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Measuring Up On Coating Thickness
Fischer Technology’s DataCenter software eases measurement requirements, giving reasons why management guru W. Edwards Deming said: “If I had to reduce my message for management to just a few words, I’d say it all had to do with reducing variation.”
Article Published: 7/1/2012
Debugging A Powder Coating Line
Faced with an adhesion issue, a manufacturer of aluminum fence and rail products set out to find the solution to their problem, even if it meant taking apart his line components one-by-one.
Article Published: 4/1/2012
Shipshape Testing: Software Meets IMO PSPC Requirements.
\New regulations apply to seawater ballast tanks of all types of ships of not less than 500 gross tonnage, and double-side skin spaces arranged in bulk carriers of 150 meters in length and upwards
Article Published: 4/1/2012

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved