« Prev | | Next »

Sort by:


Cause of Porosity
What is the most common cause of porosity on a powder coated surface and how much porosity is considered acceptable?
Ask an Expert Published: 12/1/2014
Atmospheric Control of the Powder Spray Area
It it true that ideal powder coating conditions include 45 to 60% relative humidity?
Ask an Expert Published: 10/1/2014
Bubbles in the Coating
What causes small bubbles to appear in cured coating on aluminum?
Ask an Expert Published: 10/1/2014
Film Build Control
What are some ways to control a manual electrostatic powder application in order to meet strict min and max film thickness orders?
Ask an Expert Published: 10/1/2014
Part Protection for Overseas Shipment
How can parts be treated for corrosion protection in preparation for overseas freight?
Ask an Expert Published: 9/1/2014
Abrasion Resistance of Metallic Coatings
What causes darkening on aluminum-coated platinum surfaces after abrasive treatment?
Ask an Expert Published: 8/1/2014
On the Fence about Film Thickness
How should a shop set up its racks and spray guns to achieve more uniform coverage on all sides of parts such as fence posts?
Ask an Expert Published: 8/1/2014
Liquid vs. Powder for Architectural Aluminum
Can powder coatings meet AAMA 2604 and 2605 standards?
Ask an Expert Published: 8/1/2014
Sanding Defects
What types of defects can be expected in a powder coat finish on heavily sanded 6061 aluminum forgings?
Ask an Expert Published: 8/1/2014
Lighting for a Powder Booth
What are options for adding lighting to a powder booth?
Ask an Expert Published: 7/1/2014

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved