« Prev | | Next »

Sort by:


Powder Coating Wood Picking Up
Designers have come to appreciate the flexibility provided by a quality powder coat on wood, and consumers have come to appreciate the products’ look, feel and durability.
Article Published: 4/1/2013
Dis-Charge Your Powder
A practical approach to managing electrostatic problems and hazards during powder coating
Article Published: 3/1/2013
Taking the (Oxide) Edge Off
Metal fabricators that laser-cut with oxygen take steps to prepare parts better for powder coating.
Article Published: 3/1/2013
PPG Also Wins $1.5 Million Through DoD’s SERDP
PPG will work with ARL to develop a powder topcoat that will meet military standards for ultraviolet durability, matte finish and resistance to chemical agents.
Article Published: 2/1/2013
There’s No Stopping This Powder Coating Line
McCain Manufacturing recently dramatically expanded its facilities to 100,000 sq ft to increase and improve its powder coating and finishing operations with a new automated conveyor that was installed along with a large-scale batch powder coating sy...
Article Published: 12/1/2012
Manufacturer-Turned-Powder Coater Means Value Added
Wisconsin foundry adds value to parts produced with powder coating line.
Article Published: 9/1/2012
An Introduction to Cyclic Corrosion Testing
CCT is intended to be a more realistic way to perform salt spray tests than traditional, steady-state exposures. Here's a more realistic way to perform salt spray tests traditional, steady-state exposures
Article Published: 7/1/2012
Navy Is Full Steam Ahead On Powder Coating
With the military increasing its use of powder-based coatings to cover vehicles, equipment and ships—the Army has recently announced that it will allow the use of powder coatings in its CARC coverings that are normally e-coated—more assets are getti...
Article Published: 2/1/2012
Fundamentals of Powder Coating
Equipment and process advances drive applications.
Article Published: 9/29/2011
Price is Finally Getting It Right With Coral Chemicals
How one company changed chemical baths and saw improved products and cost savings.
Article Published: 8/1/2011

« Prev | | Next »


Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2014

Subscribe | Advertise | Contact Us | All Rights Reserved