« Prev | | Next »

Sort by:

Getting a Good Finish Begins with a Great Start
Virtually all metal parts and many plastic parts have some sort of finish applied to them. These finishes are applied to improve appearance, increase corrosion resistance and enhance wear resistance.
Article Published: 3/2/2011
Pre-Colored Stainless Steel Improves Product Design, Productivity
Sandvik Materials Technology has rolled out a pre-coated metal strip steel intended to boost productivity and reduce environmental constraints associated with plating and coating in multiple industries.
Article Published: 3/1/2011
Aluminum Anodizing
Types of anodizing, processes, equipment selection and tank construction.
Article Published: 2/18/2011
New Uses For Anodized Aluminum Oxide
Anodized aluminum oxide (AAO) has attracted significant interest among the nano-science and engineering research community in recent years. AAO consists of highly aligned nanopores “self-assembled” in a hexagonally close-packed pattern.
Article Published: 12/1/2010
Becoming an Approved Aerospace Anodize Supplier
Fabrication of aerospace structure requires rigorous standards due to the high cost of rework and the severe consequences of in-flight failure. To become a supplier for aerospace anodize, an approval process which is not readily understood must be f...
Article Published: 12/1/2010
Anodizing: How to Avoid “Greenwashing” Your Product
Product manufacturers naturally want to say good things about their product. Current marketing trends emphasize environmentally beneficial attributes of a product, not just to identify the manufacturer as a good corporate citizen, but also as an ind...
Article Published: 12/1/2010
Designing for Opportunity: The Aluminum Advantage
Many industries that require innovative solutions in cost reduction and weight savings are turning to aluminum as a substitute for stainless steel and other carbon steel alloys for parts and components.
Article Published: 12/1/2010
Overview: Aerospace Anodize Finishes
The following anodizing process overviews are provided as a means of introduction to aerospace anodizing
Article Published: 11/30/2010
Adding Anodizing
Is it something you should consider?
Article Published: 11/1/2009
Large Plating Job Shop Survey
Platers are concerned about business moving to China; however they are not sitting still and just allowing it to happen...
Article Published: 11/1/2003

« Prev | | Next »

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2015

Subscribe | Advertise | Contact Us | All Rights Reserved