xxx
PF Zone: Polishing/Buffing/Deburring

Have A Finishing Question?

Most Recent Content in this Zone:

Norton Non-Woven Convolute Wheels
Convolute Wheels Offer Fewer Wheel Changes and Smear-Free Finishes
Norton | Saint-Gobain introduces a general purpose category of non-woven convolute wheels.
MP100 Tube Mirror Polishing Machine Assures Perfectly Polished Surface
New polisher from NS Máquinas protects against corrosion and scratches.
Mechanical Finishing Clinic: Vibratory Finishing Process That Produces a Visual Blasted Finish
Q. We are vibratory finishing an aluminum part and then blasting it to achieve a uniform pre-anodized finish. Can you recommend a process that can give a visual blasted finish in our vibratory machine to eliminate the blasting process?
Mechanical Finishing Clinic: Automated Abrasive Finishing for High-Volume Production
Q. We have a high-volume small stainless ½" × 1" part with a heavy external burr. We need to deburr the part in three seconds to obtain our production rates. We’ve tried high-energy mass finishing and it does not remove the burr. How can we deburr and automate this part?
Mechanical Finishing Clinic: Blasting Media That Reduce or Eliminate Ferrous Surface Contamination
Q. We are blasting our stainless parts in a blast cabinet with a finer steel shot. We are concerned about ferrous contamination but need the impact the steel media produces for our parts. What media do you recommend?

View More Content in This Zone  |  RSS RSS  |  Atom Atom

Schaffner Mfg. Co., Inc.

Suppliers | Products | Experts | News | Articles | Calendar | Process Zones

The Voice of the Finishing Industry Since 1936 Copyright © Gardner Business Media, Inc. 2016

Subscribe | Advertise | Contact Us | All Rights Reserved