Electroplating

Exploring the: Electroplating Zone

31 Results for: Whitepaper

Sort by:
Published: 8/29/2014

A Comparative Study of Gamma-Phase Zinc-Nickel Deposits Electroplated from Various Alkaline and Acid Systems
Sacrificial anodic coatings, specifically zinc deposits, have provided corrosion protection to components and parts across many industries, with an increasing demand in the automotive and industrial sectors. Today, typical sacrificial applications f...

Published: 8/13/2014

The Elimination of Whiskers from Electroplated Tin
When RoHS lead-free regulations began to take hold globally, tin and its alloys were the first choice as alternatives to eutectic tin/lead. On the solder side, the transition to using these alternatives has moved forward, but on the surface finish s...

Published: 8/13/2014

Chromium-free Etching and Palladium-free Plating of Plastics
Plastics are replacing metals in the manufacture of many parts, and quite often there is a need for metallic coatings on the plastics and other non-conductors. This paper will describe new processes of preparing ABS plastic substrates for subsequent...

Published: 5/1/2014

A New Sacrificial Corrosion Protection Mechanism for High Performance Zinc/Aluminum Flake Coating Systems and Applications
This report describes how the corrosion-protection capability of a new zinc/aluminum flake coating system is supported by a sacrificial corrosion-protection mechanism.

Published: 4/1/2014

The Electroless Deposition of Nickel-Phosphorus-Tungsten Alloys
This paper describes the successful electroless co-deposition of tungsten within a nickel-phosphorus matrix to yield several advantageous properties.

Published: 10/10/2013

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 2
This paper was submitted to NASF and the AESF Foundation Research Board in July 2013 as a 2nd-quarter report of AESF Research Project #R-117.

Published: 9/17/2013

Electrodeposition of Ni-Fe-Mo-W Alloys - Part 1
This paper was submitted to NASF and the AESF Foundation Research Board in April 2013 as a 1st-quarter report of AESF Research Project #R-117.

Published: 9/10/2013

Corrosion Resistance of High-Phosphorus Electroless Nickel with a Lower Coefficient of Friction, Nanoparticle Codeposition Electroless Nickel Layer
This paper is a peer-reviewed and edited version of a presentation delivered at NASF SUR/FIN 2013 in Rosemont, Ill., on June 11, 2013.

Published: 5/20/2013

White Bronze, Copper-Tin-Zinc Tri-metal: Expanding Applications and New Developments in a Changing Landscape
This paper deals with the renewed interest in applications for white bronze tri-metal (Cu-Sn-Zn alloy).

Published: 4/18/2013

Method for Comparison of Leveling in Decorative Acid Copper Plating
Presented here is a test mechanism used to compare and contrast systems for leveling in acid copper plating as well as additives within a system.