Gema, Dubois and Vogel Industrial Coatings Hold Powder Coating Workshops
The first is training is May 1-2 in Las Vegas, and the second is September 10-11 in the Dallas area.
The first is May 1-2 in Las Vegas, with early registration ending April 24. The second is Sept. 10-11 in the Dallas area, with early registration ending Sept. 3. Workshop fees are $299 per person for early registration or $349 per person within one week of class.
This workshop is designed for those with varying levels of experience in powder coating knowledge, and is designed to improve skills and understanding of all aspects of powder coating. The workshops will cover topics such as:
- Powder chemistry and selection
- Pretreatment best practices
- Application issues and maintenance
- Oven and curing strategies
- Troubleshooting, quality control and tricks of the trade
To register, visit https://www.gematraining.com/events-and-training/workshops/gema-dubois-vogel.
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
How can you calculate the cost of powder coating a component if you only know its surface area? Powder coating expert Rodger Talbert has the answer.
Powder coating is one of the most durable finishes that can be applied to industrial manufactured products, and offers excellent corrosion protection and is very safe because of its lack of volatile organic compounds.