| 1 MINUTE READ

Preview the International Finishing and Coating Summit

Watch Products Finishing Publisher Todd Luciano talk with Anne Goyer, executive director of the Chemical Coaters Association International (CCAI) about the International Finishing and Coating Summit (IFCS), to be held July 30–August 1.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Watch Products Finishing Publisher Todd Luciano talk with Anne Goyer, executive director of the Chemical Coaters Association International (CCAI) about the International Finishing and Coating Summit (IFCS), to be held July 30–August 1, at the Intercontinental Hotel in the Buckhead area of Atlanta, Georgia.

The International Heating Equipment Association (IHEA) and CCAI will co-host the International Thermprocess Summit (ITPS) and the IFCS. This is the first-time the two conferences will be held in conjunction with each other, highlighting synergy between the two industries and providing expanded opportunities for participants. The executive-level summits are co-sponsored by Products FinishingIndustrial Heating and Heat Treat Today publications.

The event’s agenda will include joint general sessions covering advanced manufacturing technologies, international dynamics impacting business and strategic business insights. Breakout sessions will address topics specific to industrial finishing and thermprocessing.  A tabletop exhibition will supplement the program. Also planned is a series of networking activities, including a welcome reception and a Taste of the South dinner. 

For more information, visit ccaiweb.com.

 

 

RELATED CONTENT

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

  • Touch-up Options for Powder Coated Parts [EXPERT]

    Question: I’ve been told that a powder coated part cannot be “touched-up.” I have some patio furniture that I had powder coated and the powder coating shop that did the work for me stripped the threads in holes used to rack the part.

  • Calculating the Cost of Powder Coating

    How can you calculate the cost of powder coating a component if you only know its surface area? Powder coating expert Rodger Talbert has the answer.