| 1 MINUTE READ

Teaching Basic Powder Coating

Question: Is there good source for manuals and videos on teaching basic powder coating?

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Question:

Is there good source for manuals and videos on teaching basic powder coating? It would be great if these were available in Spanish, too. A. S.

Answer:

The Powder Coating Institute has a variety of training aids including videos, books, and training courses. Some of these are available in Spanish. PCI can be contacted through its web site at www.powdercoating.org.

Related Topics

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Removing Cured Powder Coatings

    Question: What methods are available for removing cured powder coatings, and what are the pros and cons of these methods?

  • Understanding Fluidized Bed Powder Coating

    For more than 50 years, fluidized beds have been used to coat parts with powder coatings. In this article, two industry experts tackle some common questions about the fluidized bed process…