Vogel Paint Opens Expanded Powder Coating Operation
Vogel Industrial Coatings has completed the first two phases of a five-year, $29.3 million expansion plan for its powder coating manufacturing operation located at the company’s headquarters in Orange City, Iowa.
Share
Vogel Industrial Coatings welcomed more than 400 guests to help celebrate the completion of the first two phases of a five-year, $29.3 million expansion plan for its powder coating manufacturing operation located at the company’s headquarters in Orange City, Iowa.
Attendees heard remarks from Orange City Mayor Deb De Haan, Orange City Development President Daryl Beltman, Vogel Paint President Jeff Powell, Vogel Paint Vice President of Business Development Mark Vogel, and Vogel Paint Chairman and CEO Drew Vogel.
The event celebrated the completion of Phase One and Two of the expansion. The initial phases included a 91,000 square foot addition to the current building and the first portion of equipment for the new production lines. The investment for this part of the project is valued at an estimated $19.5 million. The climate-controlled, state-of-the-art plant is completed, and production has commenced.
Founded in 1926, Vogel Paint provides coating solutions to the architectural, heavy-duty protective, industrial, traffic, and powder coating markets. For information, visit vogelpaint.com.
RELATED CONTENT
-
The Powder Coating Process
Powder coating is one of the most durable finishes that can be applied to industrial manufactured products, and offers excellent corrosion protection and is very safe because of its lack of volatile organic compounds. To understand the powder coating process you should start with the fundamentals.
-
Anodizing Vs. Powder Coat
I am an engineer on a large yacht build project and urgently need information and advice on choosing a finish for the aluminum deck plates in the engine room.
-
Masking for Surface Finishing
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
