| 2 MINUTE READ

AAC Announces 2016 Winners for Student Research Poster Contest

Students from around the world presented research projects in science, bioengineering, nanotechnology, petrochemical technology, corrosion science, and related engineering disciplines presented their work.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

 

 

�

(From left to right) AAC Academic Outreach Chair, John Thornton; Burcin Bilici from Istanbul Technical University; Abby Koczera from the University of New Hampshire; Flemming Jensen from Technical University of Denmark; and AAC Education Chair, Dr. Jude M. Runge.

 

 

The Aluminum Anodizers Council (AAC) held its third Student Poster Session at the 25th Annual Anodizing Conference and Exposition this fall in Montreal, Canada. Students from around the world presented research projects in materials science, bioengineering, nanotechnology, electrochemical technology, corrosion science, and related engineering disciplines presented their work. 

The posters were presented to the three judges including AAC Education Chair, Jude M. Runge, Ph.D. of CompCote International; AAC Academic Outreach Committee Chair John Thornton of Apple, Inc.; and Mark Jozefowicz, AAC Education Committee Member of Reliant Aluminum Products. Three posters were chosen as equal winners and were each awarded a $500 scholarship.
 
Burcin Bilici of Istanbul Technical University in Istanbul, Turkey was commende for her poster, Investigating the Effect of DC Pretreatment on the Corrosion Behavior of Black Colored Anodized Aluminum Film. The focus of the research used AAO to study and control neuronal growth from stem cell precursors, according to the abstract.  
 
Abby Koczera from the University of New Hampshire was awarded for her poster, The Effects of Carboxylic Acid Additives in Anodic Alumina Coatings on Corrosion Resistance. Koczera’s research focused on stress corrosion cracking (SCC) and hydrogen-induced cracking (HIC) in aluminum alloys. According to the abstract, “the purpose of [the] study is to determine if the scanning vibrating/reference electrode technique (SVET/SRET/SVP) can be used to monitor the coupling current flowing through the solution.”
 
Flemming Jensen from the Technical University of Denmark in Lyngby, Denmark was awarded for his poster, In-situ Temperature Measurement during High Frequency Pulse Anodising of Aluminium. The poster addressed the search for an environmentally friendly anodizing process for magnesium alloys. “Nitric acid etching was extensively studied, influence of various operating parameters being clarified through a kinetic and thermodynamic study. Our study allowed predicting the etching rate and to clarify the different reactions occurring during pickling. Then an innovative anodizing process, performed in [an] acidic and environment-friendly medium, is studied,” the student noted in the abstract.
 
AAC will soon issue the Call for Student Posters for the 2017 Anodizing Conference and Exposition. The 26th Anodizing Conference and Exposition is scheduled for September 19-21, 2017 at the Westin Westminster in Westminster, (Denver) Colorado. For event information, visit the AAC conference website at AACconf.org.

For more information, visit anodizing.org.

 


 

Related Topics

RELATED CONTENT

  • Test Methods For Evaluating Anodized Aluminum

    Benefits of anodizing include durability, color stability, ease of maintenance, aesthetics, cost of initial finish and the fact that it is a safe and healthy process. Maximizing these benefits to produce a high–performance aluminum finish can be accomplished by incorporating test procedures in the manufacturing process.  

  • Plating Process Control

    The cornerstone of quality and productivity for any finishing operation, process control is a plater’s key to success. To find out how far techniques have come, where they’re headed in the future, and how platers can raise the bar, Products Finishing convened a panel of experts for a roundtable discussion on the topic. With well over 100 years of combined plating experience, experts Greg Arneson, Art Kushner, Peter Gallerani and Joelie Zak share their thoughts.

  • Electropolishing as a Pretreatment for Anodizing

    Electropolishing can be a pretreatment for anodizing or a substitute for bright dipping. Either way, it improves the surface of the aluminum...