Abstracts Due For Waterborne, High-Solids and Powder Coatings Symposium
The conference, sponsored by the School of Polymers and High Performance Materials at the University of Southern Mississippi, will be held February 24 to March 1, 2019, in New Orleans, Louisiana.
Abstracts for the 46th annual International Waterborne, High-Solids and Powder Coatings Symposium are being accepted through September 15. The conference, sponsored by the School of Polymers and High Performance Materials at the University of Southern Mississippi, will be held February 24 to March 1, 2019, in New Orleans, Louisiana.
Conference organizers are looking for papers pertaining to new and emerging technologies in the field of surface coatings related to materials, processes, production, characterization, application and markets. Suggested topics include but are not limited to:
- High solids
- Nano (structure or technology)
- Powder coatings
- Other coatings-related topics
Show organizers say papers will be selected based on the submitted abstracts, and all speakers must submit a paper for publication in the annual proceedings book. Papers that are considered principally commercial in nature will not be accepted. They also must be original and represent recent advancements in coatings science or related disciplines.
Considerations when deciding whether or not a robot is the right choice for your facility...
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
Infrared cure is gaining increased attention from coaters as a result of shorter cure cycles and the possibility of smaller floor space requirements when compared to convection oven curing.