3/21/2018

Bolta's Darrick Gula to Deliver Sur/Fin Keynote

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Gula joined Bolta in October, after leading the chrome plating and anodizing departments at General Motors in Warren, Michigan. His keynote address at Sur/Fin will begin at 1 p.m. on June 4.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Darrick Gula, director of North America business development for Bolta US, will be the keynote speaker on the first day of the 2018 Sur/Fin conference and trade show, to be held June 4-6, in Cleveland, Ohio.

Gula joined Bolta in October, after leading the chrome plating and anodizing departments at General Motors in Warren, Michigan. Previous to GM, Gula had led Harley-Davidson’s paint division in Kansas City, Missouri.

Sur/Fin kicks off with technical conference sessions the morning of Monday, June 4, followed by Gula’s keynote at 1 p.m. and then a soft opening on the trade show floor starting at 5 p.m.

Sur/Fin is presented by the National Association for Surface Finishing. For information, visit nasfsurfin.com.

Related Topics

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Aluminum Anodizing

    Types of anodizing, processes, equipment selection and tank construction.

  • Nickel Electroplating

    Applications, plating solutions, brighteners, good operating practices and troubleshooting.


Resources