9/28/2016 | 1 MINUTE READ

CCAI Announces Two New Chapters

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Georgia chapter president is Derek Dennis from Heraeus Noblelight; David Boone with Alabama Power is taking the reigns as the first president of the Alabama chapter

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
�

The new CCAI Georgia chapter officers are, from left to right, Ed Harmon, Lowell Lampe, Derek Dennis and Brit Metcalf.

 

The Chemical Coaters Association International has launched new chapters in Georgia and Alabama.

The Georgia chapter held their kick-off meeting at the Georgia Power Customer Resource Center in July.  Chapter president Derek Dennis with Heraeus Noblelight led the meeting, and chapter treasurer Lowell Lampe with Coral Chemicals gave a presentation on pretreatment.  There were 20 attendees for the charter meeting, which was followed by a social happy hour. Members enjoyed refreshments and discussed future meeting topics, plant tours and events.  To round out the new Georgia chapter board of directors, Ed Harmon with Georgia Power agreed to be vice-president, and Brit Metcalf with IFS Coatings took the role of secretary.

David Boone with Alabama Power is taking the reigns as the first president of the Alabama chapter, while Hank Arnold with Alabama Washer and Ovens will serve as vice president and Ryan Bonds with CCIS is the chapter secretary.  The chapter plans to provide educational meetings with expert speakers and networking activities to share information on relevant issues in the industry.  The chapter is currently in the process of scheduling programming.

For information about teh chapters, visit the CCAI website at ccaiweb.com

 

RELATED CONTENT

  • Applying Robotics to Your Paint Line

    Considerations when deciding whether or not a robot is the right choice for your facility...

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Zinc Phosphate: Questions and Answers

    Specific questions about zinc phosphate and pretreatment are answered in one article...


Resources