| 1 MINUTE READ

DCHN Receives ITAR Registration

DCHN serves military, aerospace and defense contractors by meeting their critical supply-chain, export/import, and recordkeeping requirements.
#plating #military #aerospace

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
�

 

 

DCHN LLC, a subsidiary of Katahdin Industries Inc., is now registered under code M35349 with the U.S. Directorate of Defense Trade Controls (DDTC) pursuant to International Traffic in Arms Regulations (ITAR) part 122. With its full-service metal finishing capabilities focused on aluminum anodizing, hard-coating, printing, and laser-marking solutions, DCHN is an approved supplier of choice for military and defense-related applications regulated under the U.S. Munitions List (USML).

 

Being ITAR compliant is another example of the on-going investment DCHN has made to better serve military, aerospace, and defense contractors by meeting their critical supply-chain, export/import, and recordkeeping requirements.


"DCHN follows some of the tightest finishing and coating processes in the anodizing industry, in order to decipher exact specifications and comply with ITAR, MIL-A-8625, MIL-STD-171, and other pertinent clauses in the contract," Tim Cabot, President of DCHN, said. "We leverage innovative and proprietary anodizing technology, process engineering expertise, and operational excellence to elevate the performance, quality, and through-put of the end-product, while lowering the overall manufacturing cost. ITAR requirements are an important aspect of doing business with military hardware manufacturers, and we are pleased to have this registration."
 

For more information on DCHN and its full-service anodizing capabilities, visit http://www.d-chn.com/?utm_source=ReleaseWire&utm_medium=ITAR-PR&utm_content=DCHN-ITAR-REGISTERATION&utm_campaign=DCHN-ITAR
 

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Coating Thickness Measurement: The Fundamentals

    A review of available test methods, common applications and innovative instrumentation...

  • Plating Q&A: Can you color stainless steel?

    Our expert, Art Kushner, says yes, you can color stainless steel, but it is not a process that is typically performed in a plating shop. Read more about his answer.