Exair's Large Internal Mix Atomizing Nozzle Conserves Liquids
Nozzle stops liquid flow when compressed air is shut off.
Share
Exair’s 1/2 NPT no-drip internal mix atomizing spray nozzles mix liquid and air inside the nozzle to produce atomization of liquids up to 300 cP with the added benefit of positively stopping liquid flow when compressed air is shut off. The company says the nozzle requires no additional air line to control the no-drip feature.
The nozzle is available in four patterns — narrow angle round, wide angle round, flat fan and 360-degree hollow circular pattern. The nozzles are designed for pressure-fed applications that don't require independent air and liquid control. It is said the nozzles are fully adjustable to minimize air and liquid consumption, and have interchangeable liquid and air caps. Flow ranges from 0.14 Gph to 303 Gph (0.5 Lph to 1147 Lph).
RELATED CONTENT
-
Coating Thickness Measurement: The Fundamentals
A review of available test methods, common applications and innovative instrumentation...
-
Masking for Surface Finishing
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
-
Understanding Paint Atomization
BASF coatings development expert Tim December explains how paint atomization works for both pneumatic spray applicators and high-speed rotary bell applicators.
