| 1 MINUTE READ

Medical Industry Shows Signs of Strength

Gardner Intelligence’s chief economist, Michael Guckes, says company earnings and economic data both indicate short- and long-term growth for manufacturers in the medical industry.
#medical #plating

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The medical industry continues to show signs of strength, says Gardner Intelligence’s chief economist, Michael Guckes. Company earnings and economic data both indicate short- and long-term growth for manufacturers in that market.

Using Gardner's three-lens approach, Guckes has been able to provide insights into the health of the medical industry for manufacturers serving it:

 

RELATED CONTENT

  • Taking the (Oxide) Edge Off

    Metal fabricators that laser-cut with oxygen take steps to prepare parts better for powder coating.

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Understanding Infrared Curing

    Infrared cure is gaining increased attention from coaters as a result of shorter cure cycles and the possibility of smaller floor space requirements when compared to convection oven curing.