Index Contracts on Weak Backlogs and Exports
October Finishing Index: 47.3
#economics
The Finishing Index cited a fourth consecutive month of contracting business activity, registering an October reading of 47.3. Index readings above 50 indicate expanding activity while values below 50 indicate contracting activity. The further away a reading is from 50 the greater the magnitude of change. Data in recent months have been bifurcated with production, new orders and supplier deliveries oscillating around the 50 mark while simultaneously backlog and export readings have trended toward accelerating contraction. Gardner Intelligence’s review of the October data found that the Index was supported by expanding new orders, supplier deliveries and production. The Index (calculated as an average of its components) was pulled lower by a mild contraction in employment activity and steeper contractions in backlog and exports activity.
The combination of expanding total new orders, coupled with contracting export orders, implies that domestic orders expanded strongly in October. A similar event was experienced in September when total new orders registered no change while export orders contracted. Gardner’s survey data in 2019 has indicated that a finisher’s geographic position has had a strong influence on new orders activity. According to the data, finishing new orders have and continue to expand in the southeast U.S., while finishers in western U.S. states have experienced steeply contracting order activity.
The Finishing Index contracted further during October, slowed by contracting activity in backlogs and exports.
Finishers located in the Southeast U.S. have reported significantly better new orders activity in 2019 than their U.S. based peers located elsewhere. West-based finishers have experienced the greatest contraction in new orders activity.
RELATED CONTENT
-
Cleaning, Pretreatment to Meet Medical Specs ISO 13485 or FDA 21 CFR820
Maximilian Kessler from SurTec explains new practices for industrial parts cleaning, metal pretreatment and decorative electroplating in the medical device industry.
-
Masking for Surface Finishing
Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.
-
Copper Plating on Aluminum and Aluminum Alloys
How can I plate copper on aluminum?