| 1 MINUTE READ

Nordson Expands Training Offering with Spanish Language Powder Coating Workshop

The two-day course provided introduction on powder-coating materials, applications, troubleshooting and maintenance.
#workforcedevelopment

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Nordson Corporation completed its first Spanish language Powder Coating Basics Workshop for customers in February at its Amherst, Ohio, facility.

The two-day course provided 35 people with an intensive introductory seminar on powder-coating materials, their application, troubleshooting and maintenance.

Nordson, a supplier of technologies for the application of powder coatings, says the content is designed for customers who are new to powder coating or are considering converting from a liquid to a powder-coating system. The course covers powder handling, application equipment and techniques, and powder spray-booth recovery systems.

Visit nordson.com/university.

Related Topics

RELATED CONTENT

  • Conveyors and Paint Systems

    Choosing the right conveyor system, coating technology, and ancillary equipment.

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.