5/16/2019

Owens College, Carlisle Hold Spray Finishing Training

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Attendees should be involved with industrial, contractor, or maintenance spray finishing applications, or spray equipment sales and distribution.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Carlisle Fluid Technologies and Owens Community College will hold spray finishing technology workshops September 11-13 in Toledo, Ohio. Classes meet from 8:30 a.m. to 4 p.m. daily and include both classroom and hands-on sessions. Two Continuing Education Units are awarded.

Attendees should be involved with industrial, contractor or maintenance spray finishing applications, or spray equipment sales and distribution. Topics for the Spray Finishing Technology Workshop include equipment types and selection; equipment setup, operation, and maintenance; surface preparation and defect analysis; material selection; and safety and regulatory concerns.

To register or for additional information, contact Jaime Wineland at Owens Community College at 800-466-9367, ext.7320, or at sprayworkshop@aim.com. Information is also available online at http://short.pfonline.com/workshops.

Related Topics

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • The Importance of Particle Size in Liquid Coatings

    Coating problems and solutions associated with particle size reduction...

  • Preventing Solvent Pop

    Preventing solvent pop on an industrial paint line...


Resources