| 1 MINUTE READ

Preview the International Finishing and Coating Summit

Watch Products Finishing Publisher Todd Luciano talk with Anne Goyer, executive director of the Chemical Coaters Association International (CCAI) about the International Finishing and Coating Summit (IFCS), to be held July 30–August 1.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Watch Products Finishing Publisher Todd Luciano talk with Anne Goyer, executive director of the Chemical Coaters Association International (CCAI) about the International Finishing and Coating Summit (IFCS), to be held July 30–August 1, at the Intercontinental Hotel in the Buckhead area of Atlanta, Georgia.

The International Heating Equipment Association (IHEA) and CCAI will co-host the International Thermprocess Summit (ITPS) and the IFCS. This is the first-time the two conferences will be held in conjunction with each other, highlighting synergy between the two industries and providing expanded opportunities for participants. The executive-level summits are co-sponsored by Products FinishingIndustrial Heating and Heat Treat Today publications.

The event’s agenda will include joint general sessions covering advanced manufacturing technologies, international dynamics impacting business and strategic business insights. Breakout sessions will address topics specific to industrial finishing and thermprocessing.  A tabletop exhibition will supplement the program. Also planned is a series of networking activities, including a welcome reception and a Taste of the South dinner. 

For more information, visit ccaiweb.com.

 

 

RELATED CONTENT

  • Understanding Infrared Curing

    Infrared cure is gaining increased attention from coaters as a result of shorter cure cycles and the possibility of smaller floor space requirements when compared to convection oven curing. 

  • Understanding Fluidized Bed Powder Coating

    For more than 50 years, fluidized beds have been used to coat parts with powder coatings. In this article, two industry experts tackle some common questions about the fluidized bed process…

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.