Toledo's Owens Community College Offers Spray Finishing Training

The workshops, presented by Carlisle Fluid Technologies brands, are being held May 9-11,September 12-14 and November 7-9.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Owens Community College in Toledo, Ohio, has teamed up with Carlisle Fluid Technologies’ finishing brands to present Spray Finishing Technology Workshops May 9-11,September 12-14 and November 7-9.

Classes meet from 8:30 a.m. to 4:00 p.m. each day and include both classroom and hands-on sessions. Attendees should be involved with industrial, contractor or maintenance spray finishing applications, or spray equipment sales and distribution. Two continuing education units will be awarded upon completion of the workshop.

 Topics covered in the workshop include:

  • Equipment types and selection.
  • Equipment set-up, operation and maintenance.
  • Surface preparation and defect analysis.
  • Material selection.
  • Safety and regulatory concerns.

To register or for additional information, contact Jaime Wineland in the college’s Workforce and Community Services Division at 800-466-9367, ext.7320, or at sprayworkshop@netscape.net.

Information is also available in an online brochure.


Related Topics


  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Coating Thickness Measurement: The Fundamentals

    A review of available test methods, common applications and innovative instrumentation...

  • Conveyors and Paint Systems

    Choosing the right conveyor system, coating technology, and ancillary equipment.