Pressure and Flow Control in Spray Guns and Rotary Atomizers
Tighter controls of paint flow and pressure may help finishers improve efficiency and profits.
#asktheexpert
How to Avoid Orange Peel in Powder Coating
One of the most common quality issues with powder coating is an uneven “orange peel” texture. Bruce Hilbert, applications/technical manager for Tiger Drylac, offers advice for avoiding this common defect.
#asktheexpert
Data Collection Trends in Metal Finishing
The finishing industry is moving towards the automation of process and production data collection. Roger Smith outlines new technology to help finishers automate and streamline.
#asktheexpert #Industry40 #measurement-testing
How Does Aluminum Impact Dry Film Thickness Readings?
Jay Kunick from Fischer discusses why different dry film thickness gauges will give different measurements on aluminum, and how to get accurate readings.
#asktheexpert #measurement-testing
Increasing Low Current Density (LCD) Coverage in Trivalent Chromium
Many factors can influence the low current density (LCD) coverage in a trivalent chromium system. Pavco decorative team manager Shane Moore discusses ideas for improving both chloride and sulfate systems.
#asktheexpert
How to Address Declining Powder Coating Coverage Over Time
Fine particles from reclaim could be to blame for powder coating problems that emerge over time. Avoid problems by keeping hooks clean, maintaining guns and using reclaim powder quickly to avoid accumulation of fines.
#asktheexpert
Choosing the Right Paint Booth
When investing in a paint booth, choosing the ideal airflow style for your business’ needs is perhaps the most important decision. Royce Day of Global Finishing Solutions explains the pros and cons of the four primary paint booth airflow styles.
#asktheexpert
Avoiding Adhesion Failure Due to Paraffin
For plating applicators, paraffin residue can cause poor adhesion, delayed blistering or other poor-quality performance of the plated deposit, including poor corrosion resistance. Coventya director of business development Greg Terrell explains how to remove paraffin-based lubricants prior to plating.
#asktheexpert
What's the Best Coating Method for Extended Outdoor Performance?
For long-lasting powder coating that holds up outdoors, consultant Rodger Talbert suggests pretreatment and washing options, a primer layer and a top coat.
#asktheexpert
Selecting PPE for Your Paint Shop
Guidelines for determining the appropriate personal protective equipment for a painting operation.
#asktheexpert
Tips for Optimizing or Expanding Your Anodizing Line
Jim Acquaviva, director of business development for Technic Equipment, offers advice for assessing areas of process improvement for anodizing operations, outlining helpful steps for an end-user self-assessment.
#asktheexpert
Understanding Paint Atomization
BASF coatings development expert Tim December explains how paint atomization works for both pneumatic spray applicators and high-speed rotary bell applicators.
#asktheexpert
Reducing Waste in Your Powder Coating Facility
Finishing industry consultant Rodger Talbert explains ways to reduce waste, heat in your powder coating facility.
#asktheexpert
Troubleshooting Bright Nickel Processes: How to Identify the Problem
For bright nickel process troubleshooting, Doug Lay of Coventya suggests narrowing the scope with a checklist.
#asktheexpert
Controlling Quality of Zinc Flake Coatings on Steel Fasteners
Scott McEuen, North American business development manager of zinc flake coatings at Atotech, explains how the quality of zinc flake coatings depends on good adhesion and bonding to the substrate of the fasteners.
#asktheexpert
Silane-based Multimetal Pretreatments for Powder Painting
When looking to switch from phosphate conversion coatings, Stewart Tymchuk from Dynamix suggests looking at silane-based products for powder coating pretreatments.
#asktheexpert
Electric vs. Pneumatic Agitators: What Makes Sense?
When determining the need for an agitator, says Mike Elberson from Autoquip, you must look at budget versus long-term energy conservation.
#asktheexpert #energy
Fixing Dull Parts From Alkaline Zinc-Nickel Bath
A lack of expected brightness is a common malady affecting many alkaline zinc-nickel platers, and MacDermid Enthone’s Adam Blakeley provides some answers to fix it.
#asktheexpert
Phosphorus Copper Anodes for Acid Copper Plating
Copper anodes produced from pure copper cathodes will result in a copper purity of greater than 99.99% copper, including silver and the alloyed phosphorus, according to Univertical’s André Depew.
#asktheexpert
Using Alternatives in Pretreatment Baths for Degreasing
Effective cleaning at low, even ambient temperatures, is possible, says Atotech’s Brandon Lloyd, and creates a safer work environment and reduces energy demands.
#asktheexpert #energy