500°F Jumbo Walk-In Oven Cures Large Parts
Grieve’s No. 1019 is a 500°F, electrically heated, walk-in batch oven designed for curing coatings onto large discs.
#curing
MacDermid Enthone Coatings Improve Durability, Aesthetics
MacDermid’s chemistries are used for metal and plastics in a range of applications.
#curing
Vertical Airflow Walk-in Oven Cures Coatings
Grieve’s No. 946 is a 1,000°F oven
#curing
Branch Fusing Enclosures Customized for Specific Heater/Control Combinations
Process Technology says its customized branch fusing enclosures ensure that heater/control circuitry is protected according to normal code requirements.
#curing
Demo Will Use UV LED Technology to Cure Polyester Powder Coat
Keyland Polymer Material Sciences will use a UV LED demonstration unit at FABTECH 2018 to cure its UVMax Polyester powder coating on cold-rolled steel bottle openers.
#curing
950°F Belt Conveyor Oven Used for Heat Treating
Grieve’s No. 831 is a 950°F (510°C) belt conveyor oven currently used for heat treating springs at a customer’s facility.
#curing
Horizontal-Airflow Cabinet Oven Used for Heat Treating
Grieve’s No. 1045 is a 1,250°F (677°C) horizontal-airflow cabinet oven currently used for heat treating.
#curing
1,000°F Electric Walk-in Oven Cures Coatings on Titanium
Grieve’s No. 946 is a 1,000°F electrically heated vertical airflow walk-in oven currently used for curing coatings on titanium screens.
#curing
Heraeus Gas Catalytic IR Heaters Certified for Use in Explosive Environments
The heaters are certified to the ATEX II 2G standard.
#curing
Are Burn-Off Ovens Safe?
Steelman Industries’ Carlton Mann says burn-off ovens are safe, and he offers some considerations for installing one.
#racking #curing #asktheexpert
Grieve 500°F Truck Oven Used to Cure Coatings on Hanging Parts
Grieve’s No. 899 is a 500°F (260°C) truck oven currently used for curing coatings on parts hanging from rods.
#curing #automotive
Grieve 500°F Clean Room Oven Used for Drying Baskets of Parts
Grieve’s No. 923 is an electrically-heated 500°F Class 100 clean room cabinet oven currently used for drying precision parts in baskets.
#curing
Grieve 550°F Belt Conveyor Oven Used for Curing Sealant
Grieve’s No. 892 is a 500°F (260°C) electrically heated belt conveyor oven currently used for curing sealant on filters at a customer’s facility.
#curing
350°F Cabinet Oven Used to Heat Tubular Aluminum Parts
Grieve’s No. 890 is a 350°F (177°C) electrically heated cabinet oven currently used for heating tubular aluminum parts at a customer’s facility.
#curing
PPG Spray Speeds Cure Time of Aerospace Sealants
PPG’s Pro-Seal 815M is designed to be sprayed onto freshly applied polysulfide aerospace sealant to improve aesthetics and cut surface cure time.
#curing #aerospace
Grieve 550°F Shelf Oven Used for Drying Powdered Resin
Grieve’s No. 859 is a 550°F (288°C) shelf oven currently used for drying powdered resin in trays at a customer’s facility.
#curing
Convection Bench Oven Used for Various Heating Applications
Grieve’s No. 952 is a 550°F, electrically heated, forced-air convection oven currently used for various programmed heating applications.
#curing
Three-Zone Conveyor Oven Suited for Curing Coatings
Grieve’s No. 865 is a 750°F (399°C) three-zone conveyor oven currently used for curing coatings at a customer’s test facility.
#curing
King Coatings Providing Canadian Forces with Mack Truck Coatings
Mack Defense of Allentown, Pennsylvania, was awarded two contracts to provide standard military pattern trucks and related equipment for the Canadian Forces.
#curing #military #automotive
How to Liquid Coat Carbon Fiber Composite Panels
Q. I am trying to liquid coat a carbon fiber composite panel. The panels look good hot out of the oven, but after cooling I am getting readthrough of the fibers. What’s causing this appearance loss? Liquid coating expert Donald Campbell has the answer.
#basics #curing