PPG Coatings Selected by Airbus for A350-1000 Launch Aircraft
A PPG low-density fuel tank and fuselage sealant provides the three flight-test aircrafts with weight savings compared with traditional sealants and will be used on production A350-1000 airplanes to benefit operators.
#masking #aerospace #pollution control
Georgia Powder Coating Wins Chamber Award
Coater walked away with the safety culture award after recently implementing an employee safety committee and has seen a reduction in safety issues since.
#curing #masking
LA Art Exhibit Uses Powder Coatings In Colorful Exhibit
Abstraction artist Lisa Williamson's new exhibit at the Tif Sigfrids Gallery in Los Angeles has caught the eye of some noted art critics who praise the use of vibrant colors in her work.
#curing #masking
Powder Coating Clinic: Solving Problems with Color Variation
Q. We are noticing differences in the color of parts coming out of the oven. It seems to happen more on some days than others. It can happen with any of our brighter colors like orange and red but does not seem to happen with more neutral colors like tan or gray. We use some infrared heaters in the first 20 feet of the oven and the rest is convection heating. We worked on balancing the oven but it is hard to get it level all the way through. What can cause color variation from part to part? How can we balance the oven and stop this problem?
#curing
Powder Coating Clinic: Oil Seeping out of Large Welded Tubing
Q. We have a large part made out of tubing that is welded together. The tubing has a lot of oil seeping out of the welds when the part is heated and causes a defect in the cured film. We cannot get the oil out of the tubing in our washer. We tried cleaning up the defect and running it again, but oil still runs out. How can we get that oil out of the tubing?
#curing
Powder Coating Clinic: Making Powder Lines More Profitable
Q. We run a job shop powder coating operation with a conveyor system that runs at around 4 to 6 fpm, depending on what product is hung. We are putting through a lot of work, but our profits are not great. Can you suggest how to improve the efficiency, or cut our cost for a better profit margin? We cannot speed up the line because we do not have enough time in the cure oven to go faster. Our powder material cost seems to be higher than what we expect based on our quotes. What are we missing?
#curing #racking
A Second Career in Powder Coating
Terence Reid and Walker Knox say they are working to continue the company's reputation for quality and customer service excellence built over two decades.
#curing
Liquid Coatings Clinic: Considerations When Purchasing a Spray Booth
Q. Our company is in the market for a new spray booth and has been looking at several options. We want to make sure it is energy and cost efficient. What should be considered in the design of a spray booth to capture paint overspray?
#energy #economics #curing
80 Years Helping Finishers
Our readers share how Products Finishing has helped their careers as the magazine celebrates its 80th year covering the finishing industry.
#curing #pollution control
Made in Eastern Iowa: Ideal Industries Makes, Powder Coats Products
Manufacturer, powder coater featured in television station's KCRG "Made In Eastern Iowa" segment that focuses on manufacturing.
#curing #masking
Axalta Coating Systems Opens Powder Coating Learning and Development Center
Facility serves Axalta’s customers as well as those interested in learning more about powder coatings or advancing their application skills; classes are available in both English and Spanish.
#masking #curing #workforce development
NSA Industries Expands in Groveton
Fabicator and powder coater St. Johnsbury, Vermont is expanding operations to Groveton, New Hampshire and bringing at least 40 new jobs to a 73,000-square-foot facility.
#curing
Powder Coating Clinic: Masking for Logo Design
Q. We are powder coating stainless steel water bottles for our company. For our logo, we would like to use a vinyl sticker or decal before powder coating. After the coating is applied, we want to peel the vinyl off to achieve a stainless steel logo effect, so we need some kind of temperature-resistant vinyl. Any suggestions?
#curing #masking
Powder Coating Clinic: Discoloration of Metal-Flake in Powder
Q. We have a metal-flake silver powder color that we use regularly. If the surface is abraded with a Taber wheel—or even a pencil eraser—it darkens significantly in the abraded area. We even have this problem when our parts scrape against cardboard packaging. Our supplier suggested we switch from an unbonded leafing aluminum to a more expensive bonded product. We tried the bonded leafing aluminum, but we still have the same problem. Certain types of friction create this effect, seemingly those that perhaps have a higher coefficient of friction. Do they remove the aluminum flake from the surface? Can you explain this problem and tell us why it happens with some abrasives and not with others? What can we do to stop this?
#curing #masking
Downdraft Versus Cross-Draft Booths
Q. We are considering a new spray booth, and we’ve read a lot about the different types of airflows. What can you tell me about downdraft booths and cross-draft booths, and what should I consider in adding one to my shop?
#masking #pollution control #curing
Nordson Partners with Powder Coating Institute to Award $5,000 Scholarship
Nordson Corporation partners with the Powder Coating Institute (PCI) to sponsor the first $5,000 Nordson BUILDS/PCI Scholarship, awarded at the PC Summit earlier this month.
#curing #masking
Trojan Powder Coating Collaborates with Artist Stephen Glassman
Flows Two Ways adorns the facade of Via 57 West, Bjarke Ingels Group’s first mixed-use residence building in New York City.
#curing #masking
CCAI's SoCal Chapter's Toys For Tots Golf Event Helps Marines
This year the chapter is aiming for 600 toys for the U.S. Marine holiday program after collecting 523 last year.
#masking #curing #marine
Tower at PNC Plaza with PPG Coatings Earns Architectural Award
Inner and outer curtain walls incorporate metal framing finished with Coraflon Sunstorm fluoropolymer powder coating in "mica gray", which meet or exceed AAMA 2605 specifications.
#curing
Toefco Expansion Adds 20,000-Square-Foot Coating Facility
Adding to its already operating two overhead conveyor lines with more than 400 available coating specs, Toefco increased both its capacity and capabilities with the addition of a new 20,000-square-foot, high-capacity, high-temperature coating facility.
#curing