Self-Induced Repair of Printed Circuit Boards
This is a re-publication of the 1992 AESF Gold Medal Award paper for best paper published in Plating & Surface Finishing in 1991. It introduces a then-new technique for repairing near-opens (constrictions) in the wiring on printed circuit boards has been developed.
#research #electronics
GF Piping Smart Sensor Electronics Increase Process Control
GF Piping supplies a range of products for industrial process control.
#electronics #pollution control
Bowman G Series XRF Designed for Electronics, Semiconductors, Connectors
Bowman coating thickness measurement system offers flexibility for measuring a variety of sample sizes, shapes and quantities.
#electronics #measurement-testing
Exair Cabinet Coolers Fit in Tight Spaces with Side Mount Kit
Exair’s NEMA 4X cabinet cooler is designed purge and cool electrical control panels, protecting sensitive electronics from heat, dirt and moisture.
#electronics
Sealed Cabinets Protect Liquid-Cooled Recifiers
SASSC liquid-cooled DC power conversion systems from Process Electronics Corp. (PEC) are designed for a range of surface finishing applications, including electroplating, electropainting, anodizing and galvanizing.
#electronics
Devices Offer Diagnostics for Improved pH/ORP Monitoring, Control
GF Piping Systems will feature Signet 2751 DryLoc pH/ORP Smart Sensor Electronics at Sur/Fin 2018, designed for probe health, glass impedance and broken glass detection for improved pH/oxidation-reduction potential (ORP) monitoring and control.
#surfin #medical #electronics
Electronics Company Gets Boost from Bel Air Finishing
A team from TE Connectivity visited the mass finishing solution provider’s Process Technology Center to get help in developing a very specific surface finish for a new automotive connector.
#electronics #automotive
Benchtop Analyzers Handle Complex Parts, Ultra-Thin Coatings
Hitachi High-Tech Analytical Science’s benchtop FT110A and FT150 energy dispersive X-ray fluorescence analyzers can be used for measuring a range of metal finishing and electronics applications.
#electronics #energy #measurement-testing
New Mirror-Coating Technology Promises Dramatic Improvements in Telescopes
At UC Santa Cruz, an electrical engineer has teamed up with astronomers to improve telescope mirrors using thin-film technology from the electronics industry
#electronics #vacuum-vapor
Read the Interview: Uyemura's Tony Revier
Revier, who was attending IPC — Association Connecting Electronics Industries gathering in Washington, D.C. for IMPACT Washington, D.C. 2017 to advocate for a pro-growth, pro-advanced-manufacturing policy agenda.
#electronics
A Conversation with Don Walsh, Uyemura
Donald Walsh has been with Uyemura International Corp. for 20 years and retires this month as its director of operations. His involvement with the surface finishing industry—and specifically the electronic and circuit board sectors—has been enormous.
#electronics
Video: Watch New Coating Protect iPhone Dropped into Pint of Guinness
The company says the video is designed to show how the electronics industry can now achieve the IPX-7 (30 minutes submersion in water at a depth of 1 meter) or more of waterproofing that is so required by mobile device manufacturers.
#electronics
Modified Metals for Space Engineering Produced in Submilliseconds
Scientists from Russia's Tomsk Polytechnic University and the Institute of High Current Electronics, SB RAS, have developed a method to apply wear-resistant coatings on metals, followed by fusing them in the substrate.
#electronics
Replacing Nickel with Tri-Metal in Electronics Plating
Tri-metal—or white bronze—is becoming an increasingly popular topic and can be used as a replacement for using nickel in plating applications.
#electronics
Meridian General Acquires PCS PowderCoat Services
Founded in 1981, PCS serves a wide spectrum of industries including automotive, home improvement, consumer products, sports equipment, musical instruments, electronics, cleaning and sanitizing, and the military.
#curing #masking #military
Plating Pioneer Fred Nobel Passes at 98
Nobel was owner of LeaRonal, Inc. which developed and produced specialty chemical additives and other products used by the connector, printed circuit board, semiconductor, and metal-finishing industries.
#electronics #masking #pollution control
New PCB Plating Process Is Reshoring Success for Whelen Engineering
Whelen Engineering was among the thousands of OEMs that sourced its printed circuit boards from Asia until increasing costs led the company to build—greenfield and in-house—America’s first new rigid PCB shop in 15 years.
#electronics
40 Under 40: Apple's Sean Novak Leads New Generation of Finishing Leaders
Novak has reached the apex of his career (so far) as manager of the surface finishing team at Apple Inc., a Cupertino, California-based conglomerate that designs, develops and sells consumer electronics, software and online services.
#curing #masking #electronics
Electroplating, Electrochemistry and Electronics - The 15th William Blum Lecture - Part 4 References and Biography
This article is the last of four parts of a re-publication of the 15th William Blum Lecture, presented at the 61st AES Annual Convention in Chicago, Illinois, on June 17, 1974. This section contains the reference/citation list and the author biography.
#research #electronics
Electroplating, Electrochemistry and Electronics - The 15th William Blum Lecture - Part 3
This article is the third of four parts of a re-publication of the 15th William Blum Lecture, presented at the 61st AES Annual Convention in Chicago, Illinois, on June 17, 1974. Dr. George Dubpernell reviews the history and extent of commercial plating, then delves into the electrochemical science, including potentials, overvoltage and connections to electronics.
#research #electronics