The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
7/7/2017 | 1 MINUTE READ

CCAI Installs 2017-18 Board and Officers at Annual Meeting

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

During the 2017 CCAI Annual Meeting in New Mexico, the Chemical Coaters Association International (CCAI) installed its 2017-18 national board of directors and officers.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

During the 2017 CCAI Annual Meeting in New Mexico, the Chemical Coaters Association International (CCAI) installed its 2017-18 national board of directors and officers.

The association is pleased to announce the leadership of the following individuals to serve as the officers of national board of directors for 2017-18:

  • President:  Ron Lum, Coral Chemical Co. – Southern California Chapter
  • Vice President: Bill Oney, Therma-Tron-X – Wisconsin Chapter
  • Treasurer:  Duane Fudge, Chemetall – Unaffiliated
  • Recent Past President: Kevin Coursin, Engineered Finishing Systems – Northern Illinois Chapter

 

In addition to the officers, serving on the national board of directors for the 2017-18 year will be: 

  • Shivie Dhillon, SunDial Powder Coatings – Southern California Chapter;
  • Jim Gallagher, Harley Davidson – Wisconsin Chapter;
  • Kevin Irving, AZZ Metal Coatings – Iowa/Central Illinois Chapter;
  • Loren Keene, Pneu-Mech Systems Mfg. – Central States Chapter;
  • Dan Labrecque, Tiger Drylac USA Inc. – West Michigan Chapter;
  • Todd Luciano, Products Finishing Magazine – Greater Cincinnati Chapter;
  • Jim Malloy, Kolene Corp. – Unaffiliated;
  • Ron McMahon, – Northern Ohio Chapter;
  • Tim Milner, JIT Powder Coating – Twin Cities Chapter; 
  • Tony Sclafani, AR Iron, LLC – Las Vegas Chapter;
  • Mark Walsworth, Nordic Ware Inc. – Twin Cities Chapter;
  • Bob Warren, – West Michigan Chapter;
  • Sam Woehler, George Koch Sons – Unaffiliated;
  • Serving as Ex-Officio Board member is Larry Melgary, Northern Coatings and Chemicals – Wisconsin Chapter.

 

For more information, visit ccaiweb.com.

RELATED CONTENT

  • Pretreatment for Painting

    Better adhesion, enhanced corrosion and blister resistance, and reduced coating-part interactions make pretreatment a must.

  • Today’s Paint-Application Methods

    An overview of spraying, dipping, flow coating, and everything in between.

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

Resources