| 1 MINUTE READ

LeKem, Eltek Expands Operations in Electroless Nickel, Paint Stripping

New corporate offices and 5,000 more square feet to keep up with production and manufacturing
#plating

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

LeKem and Eltek have expanded their building in Batesville, Indiana, with new corporate offices and 5,000 more square feet to keep up with production and manufacturing.

LeKem manufactures electroless nickel (EN) chemistries and proper EN equipment. Eltek, which specializes in industrial paint removal and burn off, is one of the biggest paint strippers in the Midwest.

Visit LeKem.com or reach Eltek at 812-933-0263

RELATED CONTENT

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

  • Blackening of Ferrous Metals

    The reasons for installing an in-house cold blackening system are many and varied.

  • Nickel Electroplating

    Applications, plating solutions, brighteners, good operating practices and troubleshooting.