The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
8/9/2017

Top Shops: Environmental Management Hours

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The Top Shops in the Products Finishing Benchmarking Survey spent 50 hours per week on managing environmental services at their shop, or more than 10 times the number of hours spent by all other shops.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
bar chart showing environmental management hours

 

The Top Shops in the Products Finishing Benchmarking Survey spent 50 hours per week on managing environmental services at their shop, or more than 10 times the number of hours spent by all other shops. The top 20 percent spent a considerable more amount of time than all other shops, which averaged about 5 hours of environmental management each week. The mean was at 41 hours per week, and the median was at 20 hours. 

Related Topics

RELATED CONTENT

  • Nickel Electroplating

    Applications, plating solutions, brighteners, good operating practices and troubleshooting.

  • Blackening of Ferrous Metals

    The reasons for installing an in-house cold blackening system are many and varied.

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.

Resources