The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
4/8/2009

Automatic Disposable Fabric Filtration System

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Serfilco’s Series ‘DF’ for unattended operation automatically indexes media for continuous filtration, even with varying input or solids content.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
Serfilco’s Series ‘DF’ for unattended operation automatically indexes media for continuous filtration, even with varying input or solids content. Contaminated solution is pumped to the diffuser tray, which distributes flow across the full width of the filter bed. Particle separation starts immediately via gravity flow through the media to the clean reservoir below the conveyor frame. Filtered solution can then gravity drain to waste or be returned to the process via a pump. Consumed fabric is advanced to the sludge box as fresh media is simultaneously indexed to the solution flow. Available in carbon steel, 316 stainless steel, CPVC or polypropylene, the unit is used in industries such as process water, phosphating/parts washers, and water wall spray booths.

Related Topics

RELATED CONTENT

  • EN-Boron Coatings Take Shine Off Hard Chrome

    In the search for the “next best thing,” some platers are turning to an electroless nickel bath with boron, often with remarkable success and outstanding results. Thus, the reintroduction of NiB as a cost-effective Chrome replacement.

  • Recovery/Recycling Methods for Metal Finishers

    A guide to lowering pollution and recovering valuable process constituents.

  • Treating Plating Wastewater

    Wastewater from plating facilities contains contaminants such as heavy metals, oil and grease and suspended solids at levels that might be considered environmentally hazardous . . .

Resources