| 1 MINUTE READ

Caplugs' CSPP-SH Series Plugs Withstand Anodizing and Ecoating

Appears in Print as: 'Countersunk Hole Plugs Withstand High-Temperature Liquid Finishing Processes'



#surfin

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Caplugs’ CSPP-SH series plugs are designed to mask countersunk holes with angled faces. These plugs provide a tight fit for the clear hole below the angled area, promoting secure protection from foreign debris. Manufactured with Caplugs Ultrabake material, these plugs are suitable for use in high-temperature liquid finishing processes such as anodizing and ecoating. The CSPP-SH series features a larger diameter at the end of the handle, making them easier to hold, the company says.

Caplugs | 888-227-5847 | www.caplugs

RELATED CONTENT

  • Coating Thickness Measurement: The Fundamentals

    A review of available test methods, common applications and innovative instrumentation...

  • Citric Acid Passivation of Stainless Steel

    An alternative product for passivation...

  • Masking for Surface Finishing

    Masking is employed in most any metal finishing operation where only a specifically defined area of the surface of a part must be exposed to a process. Conversely, masking may be employed on a surface where treatment is either not required or must be avoided. This article covers the many aspects of masking for metal finishing, including applications, methods and the various types of masking employed.