Exair Releases New 1/8 NPT No Drip Spray Nozzle
Exair has released a new 1/8 NPT No Drip Siphon Fed Air Atomizing Spray Nozzles designed to provide consistent and even flow of non-pressurized liquid
Exair (Cincinnati, Ohio) has introduced a new 1/8 NPT No Drip Siphon Fed Air Atomizing Spray Nozzles designed to provide consistent and even flow of non-pressurized liquid for applications like marking, lubricating, rinsing, cooling, quenching, wetting (moistening), dust control and humidification. The design of the Siphon Fed spray nozzle allows for the absence of liquid pressure and uses gravity-fed liquids or lifted liquids from a siphon height of 36 inches (91cm) with the added benefit of positively stopping liquid flow when compressed air is shut off.
Post spray drips can waste coatings, chemicals or water, and unwanted drips can ruin product function on sealing or mating surfaces, as well as ruin the appearance of painted or coated finishes. Exair’s No Drip Atomizing Nozzles are ideal for these situations where no post-spray drip is permissible. When the compressed air supply is shut off, the no-drip nozzle design seals off the flow of liquid eliminating the possibility of drips.
Exair's No Drip Siphon Fed Atomizing Nozzles are available in round and flat fan liquid patterns. The volume of liquid flow depends on either the gravity or suction height coupled with air pressure. They are available with 1/8, 1/4 or 1/2 NPT inlets with a variety of styles, flow rates and liquid patterns. They are CE compliant and conflict mineral-free.
Exair Corporation | www.exair.com/
RELATED CONTENT
-
Curing Oven Basics
Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...
-
Zinc Phosphate: Questions and Answers
Our experts share specific questions about zinc phosphate and pretreatment
-
A Current Affair: Examining the "No Amperage" Phenomenon
If you are performing a coating process that requires the use of a rectifier, you may have experienced the "no amperage" problem. Here's a look at the phenomenon and some solutions…