The Voice of the Finishing Industry since 1936

  • PF Youtube
  • PF Facebook
  • PF Twitter
  • PF LinkedIn
8/22/2013

Grieve Gas-Heated Cabinet Oven Cures Metal Coatings

Originally titled 'Gas-Heated Cabinet Oven Cures Metal Coatings'
Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Currently used for curing metal coatings onto parts, Grieve’s No. 887 gas-fired, 1,000°F cabinet oven features 175,000 Btu/hr installed in a modulating natural gas burner to provide heat, while a 2,000-cfm, 2-hp stainless steel recirculating blower provides a horizontal airflow across the workload.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Currently used for curing metal coatings onto parts, Grieve’s No. 887 gas-fired, 1,000°F cabinet oven features 175,000 Btu/hr installed in a modulating natural gas burner to provide heat, while a 2,000-cfm, 2-hp stainless steel recirculating blower provides a horizontal airflow across the workload. The oven offers workspace dimensions of 38 × 38 × 38 inches; an aluminized steel exterior; Type 304, 2B finish stainless steel interior; plus inner and outer door gaskets that seal against the door plug and the front face of the oven. No. 887 also features 8-inch-thick insulated oven walls consisting of 2 inches of 1,900°F block and 6 inches of 10 lb/cf density rockwool insulation.

All safety equipment is onboard as required by IRI, FM and NFPA Standard 86 for gas-heated equipment, including a 325-cfm, 1/3-hp powered forced exhauster. A digital indicating temperature controller is also provided.

RELATED CONTENT

  • Conveyors and Paint Systems

    Choosing the right conveyor system, coating technology, and ancillary equipment.

  • Electrocoating

    E-coat can produce uniform finishes with excellent coverage and outstanding corrosion resistance.

  • Curing Oven Basics

    Simply heating up the substrate does not cure the coating. There are many variables to consider when choosing the best cure oven for your application...

Resources